Service available now · 50 states Mon–Sun, 7am–9pm

Frigidaire Ice Maker Repair

Honest, symptom-based repair for Frigidaire EFIC countertop and portable ice makers and the FGIC3600 undercounter unit — bullet, nugget, and clear-cube models with self-clean. These units signal by indicator light, so every fault is diagnosed by symptom before any quote.

Models Portable EFIC countertop · Nugget EFIC201 · EFIC235 · Undercounter FGIC3600 Series Self-Clean · Nugget / Clear Cube · Quick Ice in ~13 min Coverage all 50 US states Response same-day and next-day

Schedule Frigidaire
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced Frigidaire specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing

What we fix on Frigidaire ice makers.

/01

Not making ice

The unit runs but no ice drops. A low or empty water reservoir, a stuck or failed water pump, a clogged fill line, or a sealed-system fault keeping the evaporator from freezing; the water path and the pump are checked first, since most no-ice calls are a fill or prime problem rather than the compressor.

/02

Add Water light on / will not fill

The Add Water indicator stays on because the reservoir is low or the pump cannot prime. An empty tank, an air-locked or stuck pump, a clogged inlet, or a failed water-level sensor; the reservoir is refilled and the pump primed before any electrical part is suspected.

/03

Ice too small / hollow / slow

Cubes come out small, hollow, or take far too long. A low water level, a partly clogged pump or line, a weak fan, or a refrigerant issue; the water fill and airflow are checked, and the cycle time observed, before the sealed system is considered.

/04

Water leaking

Water pools under or around the ice maker. An overfilled reservoir, a cracked tank or hose, a misaligned drain plug, or a worn seal; the tank, the hoses, and the drain are inspected so the genuine OEM part that is leaking can be replaced.

/05

Ice Full light / bin sensor blocked

The Ice Full indicator stays on and production stops even though the bin is not full. A stuck cube blocking the bin sensor or a failed sensor; the bin and the optical or lever sensor are cleared and tested so the unit resumes making ice.

/06

Cloudy or bad-tasting ice

Ice comes out cloudy, soft, or off-tasting. Stale reservoir water, scale buildup, or a unit overdue for its self-clean cycle; the reservoir is drained and the self-clean run, and the unit descaled, before any component is replaced.

/07

Pump noisy / loud operation

The ice maker buzzes, rattles, or runs loudly. A low water level cavitating the pump, a loose fan blade, or compressor vibration; the water level, the fan, and the leveling are checked before the pump or compressor is condemned.

/08

Unit will not power on

The ice maker is dead with no light or fan. A tripped outlet, a failed power adapter or cord, a control-board fault, or a tripped overload; the supply and the board are tested before any cooling component is touched.

These are the most common issues — not an exhaustive list. Our technicians diagnose and repair any Frigidaire ice maker problem, including intermittent faults, unusual symptoms, and issues not listed here.

Ice Maker repair in all 50 US states.

All locations →
Our experienced Frigidaire ice maker technicians are dispatched from local hubs in every major US metro. Whether you're in New York, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, Dallas, Miami, Atlanta, or a smaller city — we provide the same fast, expert service with genuine parts.
About Frigidaire ice maker repair

Common Frigidaire ice maker problems

Honest frigidaire ice maker repair starts with the kind of unit on your counter — a portable bullet maker such as the EFIC117 or EFIC123, a nugget maker such as the EFIC201 or EFIC235, a clear-cube maker such as the EFIC452, or the 15-inch undercounter FGIC3600. These standalone ice makers do not use fault codes; they signal with indicator lights such as Add Water and Ice Full, so every fault is read by symptom. The calls we see most are no ice at all, an Add Water light that will not clear, cubes that come out small or hollow, water leaking around the base, an Ice Full light with a blocked bin sensor, cloudy or off-tasting ice, a noisy pump, and a unit that will not power on. The water pump, the reservoir and hoses, the fan, the bin sensor, and the small sealed system all wear with use, and many faults trace simply to water level or an overdue self-clean.

Frigidaire Ice Maker Repair — Frigidaire appliance repair

Our Frigidaire ice maker repair process

As an independent, third-party service our experienced technicians approach every Frigidaire ice maker repair by symptom, because these EFIC and FGIC units carry no fault code. A no-ice complaint is traced through the water reservoir, the pump and its prime, the fill line, and the fan before the sealed system is ever considered, since the great majority of no-ice calls are a fill or prime problem. An Add Water light sends the technician to the tank and pump; an Ice Full light to a stuck cube blocking the bin sensor; and cloudy or slow ice to a descale and self-clean before any part is replaced. On the FGIC3600 undercounter unit the drain, the condenser, and the water valve are checked as well. We fit genuine OEM parts from trusted parts suppliers, and every visit is backed by a 30-day labor warranty on the workmanship. Most repairs finish in a single trip, and you can book an ice maker repair online at any time, with a clear quote before work begins and a total that depends on the diagnosis rather than a fixed price.

Frigidaire ice maker models we service

We service the Frigidaire standalone ice maker lineup, which is built under license by Curtis International and sold under the Frigidaire name. Portable and countertop bullet makers include the EFIC102, EFIC108, EFIC117, EFIC123, and the windowed EFIC189; nugget makers include the Gallery EFIC201, the freestanding EFIC235, the self-clean EFIC237, and the EFIC228-SS; clear-cube and combo units include the XL EFIC452 and the EFIC227 ice-and-water unit; and the built-in option is the 15-inch undercounter FGIC3600. These units offer self-clean cycles, quick first ice in around 13 minutes on the portable bullet models, and bin capacities and daily output that vary by size. Our model directory lists the water pumps, reservoirs, fans, bin sensors, water valves, and control boards matched to each specific build so the correct genuine OEM part is sourced the first time. Because the EFIC line is licensed and built by Curtis International rather than by the major-appliance arm, its pumps and bin sensors are model-specific, so the exact EFIC number is confirmed before any part is ordered. If you have a built-in dispenser ice maker inside a Frigidaire fridge, see our refrigerator repair page instead.

Common symptoms and what they mean

Because these ice makers use indicator lights rather than codes, the symptom is the diagnosis. No ice usually means an empty reservoir, a pump that will not prime, or a clogged fill line. The Add Water light means the tank is low or the pump is air-locked. Small, hollow, or slow cubes point to a low water level, a partly clogged pump, or weak cooling. Leaking water means an overfilled tank, a cracked hose, or a misaligned drain plug. The Ice Full light staying on when the bin is not full means a stuck cube is blocking the bin sensor. Cloudy or bad-tasting ice means the unit is overdue for a descale and self-clean. A noisy pump often just means a low water level. And a unit that will not power on traces to the outlet, the adapter, or the control board. Browse step-by-step help in our repair guides to match your symptom to a likely cause.

Service areas

Our specialist technicians cover all 50 states and the District of Columbia plus 40-plus metro areas, with a standard 24-48 hour response and same-day visits where availability allows. A Frigidaire ice maker, whether a countertop EFIC or the FGIC3600 undercounter unit, deserves a technician who checks the water path and self-clean before condemning the compressor. Every visit is handled by a skilled technician who carries the diagnostic tools and the genuine OEM parts most likely needed, so the fault is identified and, wherever possible, fixed on the first trip. Full specifications and the current ice maker lineup are published by the manufacturer at frigidaire.com. Find your area on our service locations page or book any service through the scheduling page.

F — Get started

Schedule your Frigidaire
ice maker repair today.

Book online and save 10% on labor. Available in all 50 US states, 7 days a week.