What E64 means on your Frigidaire dryer (frigidaire e64 error)
A frigidaire e64 error means the heating element is open or not connected on your Frigidaire dryer — the dryer runs but will not heat. It is one of the more common and clearly defined no-heat codes. A burned-out element or a broken wire to it is the usual cause.
Symptoms
The indicators below help confirm the condition on your Frigidaire dryer rather than a different issue that mimics it closely. Your dryer might produce one symptom or a handful together, whether they develop slowly or land all at once after a power event, a demanding wash or cook cycle, or recent installation.
- The dryer tumbles but does not heat
- Clothes stay cold and wet
- The code appears during the cycle
- Drying never completes
Common causes
Your Frigidaire dryer can show these signs for any of several reasons, so consider the probable causes before the unusual ones. Going through them in sequence separates something you can settle yourself on the dryer from a repair that wants experienced service and proper parts.
- Burned-out heating element — the element has gone open-circuit
- Broken wire to the element — a lead has failed
- Failed thermal fuse — a safety device in the heat circuit opened
- Loose element terminal — a connection backed off
Troubleshooting steps you can try
Start at the top of this list and work through your Frigidaire dryer in order rather than jumping ahead. If you reach a step involving live electricity, gas, a hot oven cavity, water, or a sealed part of the dryer, stop and let a qualified technician continue.
- Confirm both dryer breakers are on so the element has full voltage.
- Clean the lint filter and vent, since overheating from blocked airflow burns out elements.
- Do not open the heater housing while powered.
- If E64 stays, the heating element needs testing and likely replacing.
Parts a technician may replace
Depending on what the diagnosis shows, a technician working on your Frigidaire dryer may inspect, test, or replace the heating element, element wiring, thermal fuse, and element terminal block. The right part for your dryer is matched from its model and serial number, and genuine OEM components are fitted through trusted parts suppliers rather than generic substitutes, so performance, safety, and the working life of the dryer are all protected. Confirming which part has actually failed before anything is ordered keeps the repair on your dryer to what the fault really needs.
When to call a technician
E64 generally needs a technician to test and replace the heating element and check the wiring and thermal fuse. Because it is rated High severity, this condition on your dryer calls for the appliance to be taken out of use and service booked promptly, with power or water shut off at the source if anything about the dryer looks, smells, or sounds unsafe. We are independent and hold no affiliation with the manufacturer; the technicians who repair your dryer are experienced and skilled, the components fitted to the dryer are genuine OEM parts from trusted parts suppliers, and a 30-day labor warranty backs the workmanship. Quote the model and serial number of your Frigidaire dryer when you book so the right part is matched ahead of the visit and the E64 condition put right in as few trips as possible.
Related help and Frigidaire resources
If the E64 condition keeps returning after these checks, book Frigidaire dryer repair, browse our dryer error-code guides and step-by-step repair guides, or schedule service in your area on our locations page. See also the related E5B no heat. For the full manufacturer specifications for your dryer, and to look up its model, visit frigidaire.com.
