What CL means on your Frigidaire dishwasher (frigidaire cl error)
A frigidaire cl error means the door is open or not fully latched on your Frigidaire dishwasher (some models show Cd). The cycle pauses until the door closes and the latch engages. Most of the time it is simply a door that did not click shut.
Symptoms
These are the indicators that pin the condition on your Frigidaire dishwasher instead of a lookalike fault that would need a different fix. The dishwasher might produce a lone sign or a handful at once, either building gradually or appearing abruptly after a power cut, a hard cycle, or recent handling.
- The cycle pauses or will not start
- The door pops open slightly
- The latch does not click
- The code clears when you press the door firmly
Common causes
It takes only one of the faults below to make a Frigidaire dishwasher act like this, but they are listed likeliest-first for good reason. Following that order distinguishes a fast owner check on the dishwasher from a fault that needs trained service and correct Frigidaire parts.
- Door not fully shut — the latch did not engage
- Obstruction — a rack or tall item blocks the door
- Worn latch or strike — the latch no longer holds
- Failed door switch — the closed state is not confirmed
Troubleshooting steps you can try
Before calling anyone out, run through these checks on your Frigidaire dishwasher in sequence, as a fair number of faults clear at this stage. Draw the line wherever you feel out of your depth on the dishwasher, or where mains power, gas, heat, water, or a sealed component comes into play, and let a technician finish.
- Open and firmly close the door until the latch clicks.
- Check that the racks are pushed in and nothing blocks the door.
- Inspect the latch and strike for wear or debris.
- If CL stays with the door shut, the latch or switch needs service.
Parts a technician may replace
Subject to the diagnosis, a technician may test or renew the door latch, latch strike, door, hinge, and door switch on your Frigidaire dishwasher. The right component for the dishwasher is matched from the model and serial number, and genuine OEM parts come through trusted suppliers rather than generic substitutes, so the performance, safety, and long working life of the dishwasher stay intact. Establishing which part of the dishwasher has failed before ordering avoids replacing more of the appliance than the fault demands.
When to call a technician
CL that persists with the door firmly closed needs a technician to check the door latch and switch. This fault carries a Low severity rating on a dishwasher, so nothing needs doing this minute — but a recurring CL after the checks above is a job for a technician, who should confirm the cause on the dishwasher first. We run an independent repair service that is not affiliated with the manufacturer; experienced, skilled technicians work on your dishwasher, genuine OEM parts arrive from trusted parts suppliers, and the workmanship on the dishwasher is backed by a 30-day labor warranty. Provide the model and serial number of your Frigidaire dishwasher at booking so the exact part can be matched before the visit and the CL condition resolved in as few trips as possible.
Related help and Frigidaire resources
If the CL condition keeps returning after these checks, book Frigidaire dishwasher repair, browse our dishwasher error-code guides and step-by-step repair guides, or schedule service in your area on our locations page. See also the related i30 leak code. If you need the manufacturer specifications for your dishwasher or want to confirm the model, they are at frigidaire.com.
