What E14 means on your Frigidaire washer (frigidaire e14 error)
A frigidaire e14 error means a water-level reed or pressure-sensing fault on your Frigidaire front-load washer. The control relies on the level sensor to know how much water is in the tub, and when that circuit misreads, E14 appears. It is an electrical sensing fault rather than a blockage.
Symptoms
What your Frigidaire washer is doing should line up with the list below if this is genuinely the fault and not merely something that resembles it. The washer may present one sign or many, sometimes across several cycles and sometimes right after a power cut, a heavy load, or a recent installation.
- Incorrect fill levels
- The cycle stalls during fill
- The washer over- or under-fills
- The code appears early in the cycle
Common causes
What you are seeing on your Frigidaire washer can trace back to more than one root cause, which is why the list starts with the most probable. Taking them in turn shows whether your washer needs nothing more than a simple check or a proper repair with genuine Frigidaire parts.
- Failed pressure or level sensor — the sensor reads out of range
- Wiring or connector fault — the sensor circuit is degraded
- Loose sensor hose — the air tube affects the reading
- Control-board fault — the level input has failed
Troubleshooting steps you can try
Give these steps a try on your Frigidaire washer in order — the simplest fixes sit near the top. The instant a step involves mains voltage, gas, a hot cavity, water, or a sealed part of the washer, put your tools down and call a qualified technician.
- Power-cycle the washer at the breaker for a few minutes and restart.
- Confirm the supply and drain are normal so the reading is not skewed.
- Do not open sealed sensor components yourself.
- If E14 returns, the level-sensor circuit needs testing.
Parts a technician may replace
Where the fault leads on your Frigidaire washer determines the parts, and the ones typically inspected, tested, or replaced are the pressure sensor, level-sensor circuit, sensor hose, and control board. Anything fitted to the washer is matched from its model and serial number, and genuine OEM components are drawn from trusted parts suppliers instead of generic substitutes, keeping performance, safety, and the appliance long working life protected. Confirming the failed part before ordering keeps the repair on the washer to what is truly required.
When to call a technician
E14 generally needs a technician to test the pressure and level-sensor circuit and control board. Because the rating is Low severity, your washer is not in an emergency state — yet where E14 persists past the checks above, a technician should confirm the cause on the washer before anything is replaced. As an independent repair service unaffiliated with the manufacturer, we put experienced, skilled technicians in front of your washer and fit only genuine OEM parts from trusted parts suppliers, with a 30-day labor warranty on the workmanship carried out on the washer. Booking with your Frigidaire washer model and serial number to hand lets the right part be matched before the visit, so the E14 condition is resolved in as few trips as possible.
Related help and Frigidaire resources
If the E14 condition keeps returning after these checks, book Frigidaire washer repair, browse our washer error-code guides and step-by-step repair guides, or schedule service in your area on our locations page. See also the related E13 leak code. The manufacturer keeps the complete specifications and model lookup for your washer at frigidaire.com.
